[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[ALTQ/FreeBSD] Re: ALTQ 3.1 Install Problem at FreeBSD 4.6

To: freebsd-altq@xxxxxxxx
Subject: [ALTQ/FreeBSD] Re: ALTQ 3.1 Install Problem at FreeBSD 4.6
From: "anak freebsd" <anakfreebsd@xxxxxxxxxxx>
Date: Tue, 27 Aug 2002 09:24:59 +0000
Cc: ady@xxxxxxxxxxxxxx
Reply-to: freebsd-altq@xxxxxxxx
Sender: freebsd-altq-bounce@xxxxxxxx

>   Could you please give us some details about your configuration (e.g.
>what network interface(s) you are using, the ALTQ config file, dmesg,
>etc) ? Thanks.

i'm using 3 interface rl0: <RealTek 8139 10/100BaseTX>
		      rl1: <RealTek 8139 10/100BaseTX>
		      vr0: <VIA VT6102 Rhine II 10/100BaseTX>

for altq config i still try to learn from the manual and sample
i belive i made alot of mistake in my altq config because every time i run 
/usr/src/altq-3.1/altqd -d -f altq.test i got msg that my class is to slow
in this config i my goal is to limit ip 64.62.214.9 and all network under 
that ip with 256 Kbps

# cbq configuration for rl0 (256Kbps ether)
# give at least 40% to TCP
# limit HTTP from network 202.162.214.9 up to 10%
# other traffic goes into default class
interface rl0 bandwidth 256Kbps cbq
class cbq rl0 root_class NULL pbandwidth 100
class cbq rl0 def_class root_class borrow pbandwidth 95 default
class cbq rl0 tcp_class def_class borrow pbandwidth  40# cbq configuration 
for rl0 (256Kbps ether)
# give at least 40% to TCP
# limit HTTP from network 64.62.214.9 up to 10%
# other traffic goes into default class
interface rl0 bandwidth 256Kbps cbq
class cbq rl0 root_class NULL pbandwidth 100
class cbq rl0 def_class root_class borrow pbandwidth 95 default
class cbq rl0 tcp_class def_class borrow pbandwidth  40
filter rl0 tcp_class 0 0 0 0 6
class cbq rl0 csl_class tcp_class pbandwidth  100
filter rl0 csl_class 0 0 64.62.214.9 netmask 0xfffffff8 80 6
filter rl0 csl_class 64.62.214.9 netmask 0xfffffff8 0 0 80 6
filter rl0 tcp_class 0 0 0 0 6
class cbq rl0 csl_class tcp_class pbandwidth  100
filter rl0 csl_class 0 0 64.62.214.9 netmask 0xfffffff8 80 6
filter rl0 csl_class 64.62.214.9 netmask 0xfffffff8 0 0 80 6

and this is my dmesg

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #1: Mon Aug 26 19:47:31 JAVT 2002
    anak@bmx.babalan.com:/usr/src/sys-altq/compile/ALTQ
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium 4 (1600.07-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory  = 234815488 (229312K bytes)
avail memory = 223023104 (217796K bytes)
Preloaded elf kernel "kernel" at 0xc04cd000.
md0: Malloc disk
altq: major number is 96
Using $PIR table, 5 entries at 0xc00f7c10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b091)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8d04 graphics accelerator> at 0.0 irq 5
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 
0xdfffff00-0xdfffffff irq 11 at device 9.0 on pci0
rl0: Ethernet address: 00:50:fc:60:92:a3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 
0xdffffe00-0xdffffeff irq 3 at device 11.0 on pci0
rl1: Ethernet address: 00:50:fc:5f:51:a0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xfc00-0xfc0f at device 17.1 on 
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 3 at device 17.2 
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 3 at device 17.3 
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 3 at device 17.4 
on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 
0xdffffd00-0xdffffdff irq 5 at device 18.0 on pci0
vr0: Ethernet address: 00:07:95:1e:f1:2e
miibus2: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding 
enabled, default to accept, unlimited logging
ad0: 14305MB <Maxtor 2R015H1> [29065/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
module_register_init: MOD_LOAD (altq_cbq, c012ba20, 0xcd27c314) error 16

best regards

anak

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com

_________________________________________________________________
Send 'unsubscribe freebsd-altq' to listar@rofug.ro to unsubscribe

Prev by Date: [ALTQ/FreeBSD] Re: ALTQ 3.1 Install Problem at FreeBSD 4.6
Previous by thread: [ALTQ/FreeBSD] Re: ALTQ 3.1 Install Problem at FreeBSD 4.6
Next by thread: [ALTQ/FreeBSD] New sys-altq patchset for FreeBSD 4.6-STABLE as of 24th August
Index(es):
- Date
- Thread